03-07 Accord V6 MT (ONLY)
Upgraded Transmission Mount - Complete Kit (Front and Rear Mount + Hardware Included)
Our HalferLand Performance 03-07 Accord V6 MT ONLY Upgraded Transmission mounts will help stiffen and improve upon the soft and small stock OEM mount. In many case's when the engine has been modified and power has been added (even at stock power levels), the engine and transmission will rock and have deflection, allowing the engine and trans to move in the engine bay. When this happens the tires and suspension can become "unloaded" and lead to the dreaded "wheel hop" which can break axles and rattle parts loose and also will lead to the tires will breaking free and loosing traction. When you add our HalferLand Performance Upgraded Trans mounts Kit you will stiffen and add rigidity to the entire engine and transmission assembly as a whole (upgraded motor mounts help a lot in this situation also), thus cutting down the deflection and allowing the tires and suspension to do their jobs a little easier. The reduction in wheel hop and stabilizing the engine/transmission assembly will also help improve the life span of other mounts, bushings, bearings and other parts such as axles, as they are not be exposed over and over to the harsh shock loads. This can also help with improving your 60' time or launching the car, as you will have more traction off the line.
- Includes both Front and Rear Upgraded Transmission Mounts + Hardware To Install
- Helps prolong the life of axles, bushings and other mounts if the vehicle is driven hard
- Add's rigidity to the entire engine and transmission assembly
- Helps improve launching/off the line starts
- Helps eliminate Wheel hop
- Improves traction
- Easy Install
1.) Break the front drive side wheel lug nuts loose
2.) Chalk the rear tires so the car does not roll when jacked up
3.) Jack the car up and support it with jack stands.
4.) Remove the front driver side wheel
5.) Located both front and rear trans mounts
6.) simply unbolt and remove then, then install our mount kit using the extended hardware supplied.
IT'S LITERALLY THAT EASY. INSTALLATION TIME 15-20MINS