HLP Injector Testing and Sonic Cleaning Services
ALL MAKES, ALL MODELS OF J-SERIES ENGINES + ALL OTHER HONDA AND ACURA ENGINES (K, H, F, B, D, etc)
* You are responsible for shipping us the injectors. RETURN SHIPPING IS FREE!
Our best suggestion is to use USPS Small Flat Rate Box which can be picked up at any local post office for free and will only cost around $10 to ship.
DESCRIPTION
As our beloved engines age and with modern fuels all having some amount of ethanol in them these days, we have been seeing more and more customers with fueling issues. As we tune customers (we offer Hondata and Ktuner tuning) we are starting to see an uptick in odd AFR readings and more importantly random knocks at low to moderate rpms and throttle inputs. In most cases if we cannot tune the knocks out we suggest our customer to get their injectors cleaned and usually after the customer performs the service the large majority, if not all, knocks disapear.
Modern fuel injectors atomize the fuel into a mist and when the injectors get clogged, even slightly, this can cause the mist to turn into a drop or glob of fuel, or the bigger issue being the injector does not spray out of that port at all. Fuel Atmozation is a huge key to how your engine performs, the more even or consistent an injector atomizes the easier it is for the spark plug to ignite the fuel and the engine has a chance to burn the fuel completely. When fuel pools up in one area from a poor flowing injector you can get hot spot or just an overall bad combustion cycle which can lead to knock/detonation.
SERVICES / TESTING / CLEANING
- This service is and will always be for a complete set of (6) Injectors
- All (6) Injectors will be sonic cleaned prior to testing
- They will then go through a 8-Point flow test to the below specifications
- Test and Flow Print out will be provided to the customer upon completion and return shipping
FLOW TESTING
- Sonic Cleaned before testing
- 43.5 psi Test Pressure
- Leak Test
- Idle Test
- Idling Spray Value Test
- Medium Speed Spray Value Test
- High Speed Spray Value Test
- Acceleration Test
- Medium Speed Test
- High Speed Test
* RETURNS & ORDER CANCELING POLICY*
- ALL ORDERS ARE SUBJECTED TO OUR (1) MONTH (28 DAYS) RETURN POLICY (THIS EXCLUDES ANY PORT AND POLISH PARTS, PNP PART RETURNS/CANCELLING IS BELOW). WE OFFER A NO HASSLE RETURN POLICY ON ANY PARTS WITHIN THE FIRST (28) DAYS OF YOUR PURCHASE. ALL PARTS MUST BE RETURNED IN THEIR ORIGINAL CONDITION, PACKAGING AND NEVER INSTALLED. A FULL INSPECTION WILL BE PERFORMED UPON RECEIVING THE ORDER/PARTS BACK TO US AND IF DETERMINED THE PART WAS INSTALLED OR MODIFIED/DAMAGED THE RETURN WILL BE DENIED.
ALL REFUNDS AND RETURNS ARE SUBJECT TO A 3.5% CREDIT CARD TRANSACTION FEE. THIS IS DUE TO THE INITAL ORDER TRANSACTION FEE WE WERE CHARGED FOR YOUR ORDER, PLUS THE ADDITONAL REFUND TRANSACTION. THOUGH THERE ARE TWO TRANSACTION FEE'S CHARGED TO US, WE ARE ONLY CHARGING YOU FOR THE REFUND FEE.
- ANY PART RETURNED AFTER THE (28) DAY RETURN POLICY WILL BE SUBJECTED TO A 3% RESTOCKING FEE.
- FOR TUNING ORDERS, NO RETURNS ARE ACCEPTED UNLESS NO TUNING OR REVISIONS HAVE BEEN STARTED. AFTER OUR FIRST REVISION/TUNE IS SENT TO OUR CUSTOMER VIA EMAIL, NO REFUNDS WILL BE ALLOWED OR AUTHORIZED. THIS APPLIES FOR BOTH SINGLE SESSION (TUNE TILL RIGHT) AND LIFETIME TUNES.
- There are no returns accepted for any Port and Polish parts, due to the parts being modified and unable to be returned to their stock/original condition. There is no exception to this policy...EVER.
- If the customer selected to have HalferLand Performance source/provide a core part(s) and chooses to cancel their order prior to shipping or starting the modifications/porting, a 20% part cost restocking/sourcing fee will be assessed from the credit/return. Example, the core part provided cost $100, a 20% Restock/Sourcing fee of $20 will be deducted from the credit of the order. This is due to our cost to source, purchase, clean the part and now the order being cancelled, we now are forced to sit on the part with direct order being associated with it or that we can use it for.
- Order Cancelling may be done prior to the start of any modification or work and before shipping. If the parts modifications has already been begun or the parts has shipped, then the order cannot be canceled and will be filled/finished accordingly. If its a non PnP part and the order ships, the customer is responsible for returning the part/order using their preferred carrier. Our (28) Day Return Policy guidelines remain, parts must be returned in original packaging, never installed, modified or damaged.
