Fel-Pro Permatorque Head Gasket
* For ALL J32 or J35 Engines
and will come in SETS x2 Head Gaskets
~~ GASKET SPEC'S AND THICKNESS ~~
All Gaskets are +.5mm over standard bore (piston diameter)
J30 = 86.5mm
J32 = 89.5mm
J35 = 89.5mm
J37 = 90.5mm
OEM Gasket Thickness = .028"
Felpro Gasket Thickness = .027"
( only .02:1 increase in compression over oem...which is nothing! )
Mahle Gasket Thickness = .053"
( .63:1 LESS compression. If you want to decrease compression by over half a point (Turbo, SuperCharger) please see our MAHLE Head Gasket store listing )
- DESCRIPTION -
*SOLD IN SETS, NOT SINGLES*
We are proud to release yet another piece to the High HP J-Series puzzle, in the Fel-Pro Permatorque Performance Head Gasket with NextGen Coating.
The Proprietary NextGen Coating layer fills in imperfections up to 80ra variance, assuring a solid seal every time even with rough machining. Also, over any stock MLS gasket, the Permatorque coating has a higher resiliency to excessive engine temps found in performance engines, to reduce any gasket pushout/deflection and ensuring the tightest seal possible even at high running temperatures and pressures. Lastly, all head gaskets have a laser welded combustion sealing area to prevent blow out at high pressures.
* RETURNS & ORDER CANCELING POLICY*
- ALL ORDERS ARE SUBJECTED TO OUR (1) MONTH (28 DAYS) RETURN POLICY (THIS EXCLUDES ANY PORT AND POLISH PARTS, PNP PART RETURNS/CANCELLING IS BELOW). WE OFFER A NO HASSLE RETURN POLICY ON ANY PARTS WITHIN THE FIRST (28) DAYS OF YOUR PURCHASE. ALL PARTS MUST BE RETURNED IN THEIR ORIGINAL CONDITION, PACKAGING AND NEVER INSTALLED. A FULL INSPECTION WILL BE PERFORMED UPON RECEIVING THE ORDER/PARTS BACK TO US AND IF DETERMINED THE PART WAS INSTALLED OR MODIFIED/DAMAGED THE RETURN WILL BE DENIED.
ALL REFUNDS AND RETURNS ARE SUBJECT TO A 3.5% CREDIT CARD TRANSACTION FEE. THIS IS DUE TO THE INITAL ORDER TRANSACTION FEE WE WERE CHARGED FOR YOUR ORDER, PLUS THE ADDITONAL REFUND TRANSACTION. THOUGH THERE ARE TWO TRANSACTION FEE'S CHARGED TO US, WE ARE ONLY CHARGING YOU FOR THE REFUND FEE.
- ANY PART RETURNED AFTER THE (28) DAY RETURN POLICY WILL BE SUBJECTED TO A 3% RESTOCKING FEE.
- FOR TUNING ORDERS, NO RETURNS ARE ACCEPTED UNLESS NO TUNING OR REVISIONS HAVE BEEN STARTED. AFTER OUR FIRST REVISION/TUNE IS SENT TO OUR CUSTOMER VIA EMAIL, NO REFUNDS WILL BE ALLOWED OR AUTHORIZED. THIS APPLIES FOR BOTH SINGLE SESSION (TUNE TILL RIGHT) AND LIFETIME TUNES.
- There are no returns accepted for any Port and Polish parts, due to the parts being modified and unable to be returned to their stock/original condition. There is no exception to this policy...EVER.
- If the customer selected to have HalferLand Performance source/provide a core part(s) and chooses to cancel their order prior to shipping or starting the modifications/porting, a 20% part cost restocking/sourcing fee will be assessed from the credit/return. Example, the core part provided cost $100, a 20% Restock/Sourcing fee of $20 will be deducted from the credit of the order. This is due to our cost to source, purchase, clean the part and now the order being cancelled, we now are forced to sit on the part with direct order being associated with it or that we can use it for.
- Order Cancelling may be done prior to the start of any modification or work and before shipping. If the parts modifications has already been begun or the parts has shipped, then the order cannot be canceled and will be filled/finished accordingly. If its a non PnP part and the order ships, the customer is responsible for returning the part/order using their preferred carrier. Our (28) Day Return Policy guidelines remain, parts must be returned in original packaging, never installed, modified or damaged.