HalferLand Performance
V.2 Billet CnC EGR Block Off Plate
Item Description
When it comes to modern cars the Government implements strict emission standards on them. It's well known that many of those implementations usually adversely effect the cars all over performance (cats, egr, etc), and one of those main features is the EGR system (exhaust gas recirculation). In short, the EGR system recirculates old spent exhaust gases back into combustion chamber, basically giving that dirty air another round of cleaning, to then come back out of the exhaust with less Nox pollutants.
On the flip side, what it also does is increase the amount of carbon build up within your motor (making it dirtier quicker, allowing for more build up on pistons and valves) and also introduces Dirty/HOT air back into the cylinders....which to burn efficiently need fresh/clean air, not old hot dirty air (reducing HP). When this system is taken out of the equation you will see a noticeable extended lifespan of the engine, cleaner intake and internal parts and most of all MORE HP POWER!
Vehicle Fitment/SPEC'S
- Choose your hardware from the drop-down menu
Can add in our HalferLand Sunken/Flush fit Hardware to clean up your engine bay appearance
OR
Choose no hardware and reuse the stock stud and nut
- If a gasket is needed, you may add on in the dropdown option selection menu under the pricing
- Fits All Honda's/Acura engines (B,C,D,F,H,K) and J-Series Engines
- Must be noted without a tuning system this will throw a EGR code but will not effect the vehciles driving and you may drive as normal.
- If you have a tuning system such as Hondata, you can turn the EGR code off in their software.
- Some have bypassed or "Jumped" the harness to trick the ECU and stop the CEL code
NOTICE FOR APPLICATION AND USE
This product is manufactured for race use only, and is sold for installation on vehicles designed solely for competition purposes only. It is the installers and/or user of this product responsibility to ensure that it is used in compliance with all applicable laws and regulations according to their State or Region.
Once this product is installed, the vehicle may never be used, or registered or licensed for use, on a public highway or road. If you install this product on your vehicle and use the vehicle on a public highway or road, you will violate the clean air act and may be subject to personal civil or criminal liability, including fines.
* RETURNS & ORDER CANCELING POLICY*
- ALL ORDERS ARE SUBJECTED TO OUR (1) MONTH (28 DAYS) RETURN POLICY (THIS EXCLUDES ANY PORT AND POLISH PARTS, PNP PART RETURNS/CANCELLING IS BELOW). WE OFFER A NO HASSLE RETURN POLICY ON ANY PARTS WITHIN THE FIRST (28) DAYS OF YOUR PURCHASE. ALL PARTS MUST BE RETURNED IN THEIR ORIGINAL CONDITION, PACKAGING AND NEVER INSTALLED. A FULL INSPECTION WILL BE PERFORMED UPON RECEIVING THE ORDER/PARTS BACK TO US AND IF DETERMINED THE PART WAS INSTALLED OR MODIFIED/DAMAGED THE RETURN WILL BE DENIED.
ALL REFUNDS AND RETURNS ARE SUBJECT TO A 3.5% CREDIT CARD TRANSACTION FEE. THIS IS DUE TO THE INITAL ORDER TRANSACTION FEE WE WERE CHARGED FOR YOUR ORDER, PLUS THE ADDITONAL REFUND TRANSACTION. THOUGH THERE ARE TWO TRANSACTION FEE'S CHARGED TO US, WE ARE ONLY CHARGING YOU FOR THE REFUND FEE.
- ANY PART RETURNED AFTER THE (28) DAY RETURN POLICY WILL BE SUBJECTED TO A 3% RESTOCKING FEE.
- FOR TUNING ORDERS, NO RETURNS ARE ACCEPTED UNLESS NO TUNING OR REVISIONS HAVE BEEN STARTED. AFTER OUR FIRST REVISION/TUNE IS SENT TO OUR CUSTOMER VIA EMAIL, NO REFUNDS WILL BE ALLOWED OR AUTHORIZED. THIS APPLIES FOR BOTH SINGLE SESSION (TUNE TILL RIGHT) AND LIFETIME TUNES.
- There are no returns accepted for any Port and Polish parts, due to the parts being modified and unable to be returned to their stock/original condition. There is no exception to this policy...EVER.
- If the customer selected to have HalferLand Performance source/provide a core part(s) and chooses to cancel their order prior to shipping or starting the modifications/porting, a 20% part cost restocking/sourcing fee will be assessed from the credit/return. Example, the core part provided cost $100, a 20% Restock/Sourcing fee of $20 will be deducted from the credit of the order. This is due to our cost to source, purchase, clean the part and now the order being cancelled, we now are forced to sit on the part with direct order being associated with it or that we can use it for.
- Order Cancelling may be done prior to the start of any modification or work and before shipping. If the parts modifications has already been begun or the parts has shipped, then the order cannot be canceled and will be filled/finished accordingly. If its a non PnP part and the order ships, the customer is responsible for returning the part/order using their preferred carrier. Our (28) Day Return Policy guidelines remain, parts must be returned in original packaging, never installed, modified or damaged.
