Walbro / TI 525 LPH Fuel Pump
Genuine Direct From T.I U.S.A.
* FUEL PUMP ONLY. EXACTLY AS SEEN IN THE LISTING IMAGES *
* No lines, strainer, etc. are included. All oem components can be used, see below "How To" section and video *
1000whp Capable @ 43.5 psi on E85
We are proud to add yet another piece to the 1000whp J-Series Capable puzzle. Along with our HLP E85/AN Plug N Play main fuel line kit and our FIC Injector offerings , we now bring you the basics that you will need in order to get your J-Series past the 800whp mark and into the 1000's (obviously with the correct supporting mods). In it's simpliest form this platforms stock fuel system can handle quite a bit. We have found the oem fuel rails can EASILY flow 800whp, leaving the only limitation being the injectors and fuel pump! Now with the Walbro 535LPH fuel pump yet another piece of the puzzle drops off the list.
FEATURES AND REQUIREMENTS
Flow = 525 Liters Per Hour
Roughly 1000whp Capable on E85 @ 43.5psi (J-Series stock fuel pressure)
Some light modifcation will be needed in order to fit into the stock fuel pump housing, SEE BELOW
Here's a Fuel Pump Calculator if you need it
https://deatschwerks.com/pages/fuel-pump-calculator?srsltid=AfmBOoo5bTnoZp0eCZrgkz54SavyOAnze6obmYBSiRhW5b_Nz1JWyxWP
HOW TO VIDEO - STOCK FUEL PUMP HOUSING MODIFCATIONS
I apologize for the video quaility, it was 6+ years ago just before HLP was offically formed.
* RETURNS & ORDER CANCELING POLICY*
- ALL ORDERS ARE SUBJECTED TO OUR (1) MONTH (28 DAYS) RETURN POLICY (THIS EXCLUDES ANY PORT AND POLISH PARTS, PNP PART RETURNS/CANCELLING IS BELOW). WE OFFER A NO HASSLE RETURN POLICY ON ANY PARTS WITHIN THE FIRST (28) DAYS OF YOUR PURCHASE. ALL PARTS MUST BE RETURNED IN THEIR ORIGINAL CONDITION, PACKAGING AND NEVER INSTALLED. A FULL INSPECTION WILL BE PERFORMED UPON RECEIVING THE ORDER/PARTS BACK TO US AND IF DETERMINED THE PART WAS INSTALLED OR MODIFIED/DAMAGED THE RETURN WILL BE DENIED.
ALL REFUNDS AND RETURNS ARE SUBJECT TO A 3.5% CREDIT CARD TRANSACTION FEE. THIS IS DUE TO THE INITAL ORDER TRANSACTION FEE WE WERE CHARGED FOR YOUR ORDER, PLUS THE ADDITONAL REFUND TRANSACTION. THOUGH THERE ARE TWO TRANSACTION FEE'S CHARGED TO US, WE ARE ONLY CHARGING YOU FOR THE REFUND FEE.
- ANY PART RETURNED AFTER THE (28) DAY RETURN POLICY WILL BE SUBJECTED TO A 3% RESTOCKING FEE.
- FOR TUNING ORDERS, NO RETURNS ARE ACCEPTED UNLESS NO TUNING OR REVISIONS HAVE BEEN STARTED. AFTER OUR FIRST REVISION/TUNE IS SENT TO OUR CUSTOMER VIA EMAIL, NO REFUNDS WILL BE ALLOWED OR AUTHORIZED. THIS APPLIES FOR BOTH SINGLE SESSION (TUNE TILL RIGHT) AND LIFETIME TUNES.
- There are no returns accepted for any Port and Polish parts, due to the parts being modified and unable to be returned to their stock/original condition. There is no exception to this policy...EVER.
- If the customer selected to have HalferLand Performance source/provide a core part(s) and chooses to cancel their order prior to shipping or starting the modifications/porting, a 20% part cost restocking/sourcing fee will be assessed from the credit/return. Example, the core part provided cost $100, a 20% Restock/Sourcing fee of $20 will be deducted from the credit of the order. This is due to our cost to source, purchase, clean the part and now the order being cancelled, we now are forced to sit on the part with direct order being associated with it or that we can use it for.
- Order Cancelling may be done prior to the start of any modification or work and before shipping. If the parts modifications has already been begun or the parts has shipped, then the order cannot be canceled and will be filled/finished accordingly. If its a non PnP part and the order ships, the customer is responsible for returning the part/order using their preferred carrier. Our (28) Day Return Policy guidelines remain, parts must be returned in original packaging, never installed, modified or damaged.
