Hondata Compatible ECU
(For Accord V6 M/T and 04-06 Base 3.2 TL's M/T) ECU
*Fully Inspected, Tested and Guaranteed for (1) Year
RDB-A02 - RDB-A63
or
RDA-A62 - RDA-84
https://hondata.com/products/flashpro/flashpro-tl?route=product/product&language=en-gb&filter=14
* Please Note, these ECU's are used OEM units, so some light signs of wear may be visibile. This usually consist of superficial outter shell bends or dents, again that is just an outter protective shell and does not effect the ECU's functionality. We open ALL ECU's for inspection when they arrive to make sure they are ALL 100% intact and functional.
These ECU's units are 100% Stock and have NOT had the Hondata Cruise Control bridge soldered in. So if you chose to have that function, you will need to open the ECU and solder the bridge in. Please follow the Hondata instructions provided with the unit, which is very straight forward and easy.
This listing is for the ECU ONLY. You can find our Plug N Play Adapter Harnesses and our ECU Reprogramming Service through our "Tuning/Electronics" store category
Compatiblity and Description
This ECU is re-writable and compatible under Hondata's requirements for the 03-07 Honda Accord V6 M/T and 04-06 Acura TL 3.2 Base M/T (Please see links below to Hondata's requirements and website). In addition to this ECU you will require Hondata's Adapter Harness and Flash Pro Module. If you are in need of Re-Programming your new ECU, Key's and Immobilizer to your car, we also offer this service (No Dealer or high cost needed) and please see our listing "ECU, Key, Immobilizer Reprogramming".
If you are using a 07-08 TL ECU for a manual transmission vehicle to run FlashPro, it's best to setup all the wiring, install the ECU into your car and hook up Hondata Flashpro, in order to flash a manual transmission tune onto the ECU before trying to reprogram/ sync the new ECU to your cars VIN, keys and Immobilizer. The ECU does not need to be synced to your car in order to do this through Hondata. Once the you have flashed a manual tran tune to the new ecu, you can now reprogram/sycn the new ecu to your cars vin, keys and immobilizer, completing the entire setup process.
03-07 Honda Accord V6 M/T
04-06 Acura TL Base M/T (No CAN Adapter needed for 06' TL)
* RETURNS & ORDER CANCELING POLICY*
- ALL ORDERS ARE SUBJECTED TO OUR (1) MONTH (28 DAYS) RETURN POLICY (THIS EXCLUDES ANY PORT AND POLISH PARTS, PNP PART RETURNS/CANCELLING IS BELOW). WE OFFER A NO HASSLE RETURN POLICY ON ANY PARTS WITHIN THE FIRST (28) DAYS OF YOUR PURCHASE. ALL PARTS MUST BE RETURNED IN THEIR ORIGINAL CONDITION, PACKAGING AND NEVER INSTALLED. A FULL INSPECTION WILL BE PERFORMED UPON RECEIVING THE ORDER/PARTS BACK TO US AND IF DETERMINED THE PART WAS INSTALLED OR MODIFIED/DAMAGED THE RETURN WILL BE DENIED.
ALL REFUNDS AND RETURNS ARE SUBJECT TO A 3.5% CREDIT CARD TRANSACTION FEE. THIS IS DUE TO THE INITAL ORDER TRANSACTION FEE WE WERE CHARGED FOR YOUR ORDER, PLUS THE ADDITONAL REFUND TRANSACTION. THOUGH THERE ARE TWO TRANSACTION FEE'S CHARGED TO US, WE ARE ONLY CHARGING YOU FOR THE REFUND FEE.
- ANY PART RETURNED AFTER THE (28) DAY RETURN POLICY WILL BE SUBJECTED TO A 3% RESTOCKING FEE.
- FOR TUNING ORDERS, NO RETURNS ARE ACCEPTED UNLESS NO TUNING OR REVISIONS HAVE BEEN STARTED. AFTER OUR FIRST REVISION/TUNE IS SENT TO OUR CUSTOMER VIA EMAIL, NO REFUNDS WILL BE ALLOWED OR AUTHORIZED. THIS APPLIES FOR BOTH SINGLE SESSION (TUNE TILL RIGHT) AND LIFETIME TUNES.
- There are no returns accepted for any Port and Polish parts, due to the parts being modified and unable to be returned to their stock/original condition. There is no exception to this policy...EVER.
- If the customer selected to have HalferLand Performance source/provide a core part(s) and chooses to cancel their order prior to shipping or starting the modifications/porting, a 20% part cost restocking/sourcing fee will be assessed from the credit/return. Example, the core part provided cost $100, a 20% Restock/Sourcing fee of $20 will be deducted from the credit of the order. This is due to our cost to source, purchase, clean the part and now the order being cancelled, we now are forced to sit on the part with direct order being associated with it or that we can use it for.
- Order Cancelling may be done prior to the start of any modification or work and before shipping. If the parts modifications has already been begun or the parts has shipped, then the order cannot be canceled and will be filled/finished accordingly. If its a non PnP part and the order ships, the customer is responsible for returning the part/order using their preferred carrier. Our (28) Day Return Policy guidelines remain, parts must be returned in original packaging, never installed, modified or damaged.
